"[Updated] 2024 Approved 10 Recording Tips to Record Audio in High Quality"
![](/images/site-logo.png)
10 Recording Tips to Record Audio in High Quality
10 Recording Tips for Recording Audio with High Quality
Richard Bennett
Oct 26, 2023• Proven solutions
Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.
1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound
Bonus Tip-Record Your Audio with Wondershare Filmora
Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.
1. Silence everything you don’t want your microphone to record
When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.
2. Put your mobile phone in airplane mode
Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.
3. Minimize echo
If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.
4. Block wind from reaching your microphone
Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.
5. Upgrade your microphone
As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.
Need help with deciding on a microphone to buy? Check out our recommended list of microphones.
6. Adjust your levels
Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.
7. Start with a sound cue if you’re planning to do some syncing in post
If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.
8. Get close to the sound
Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.
9. ADR
When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.
10. Record Ambient Sound
Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.
Richard Bennett
Richard Bennett is a writer and a lover of all things video.
Follow @Richard Bennett
Also read:
- [Updated] Tips for Safeguarding Your YouTube Presence
- [Updated] Discovering Beyond VidCon Key Youtube Occasions for 2024
- [Updated] The Complete User's Manual to YouTube Editing via FinalCut Pro
- [Updated] Steps to an Exceptional YouTube Closure
- [Updated] Tailoring Thumbnails for Increased Video Engagement on YouTube
- [New] 2024 Approved Erase the Obvious Techniques for Masked YouTube Content
- [New] 2024 Approved 10 Viral Exercise Routines to Keep Your Channel Thriving
- [New] Best Buy List Selecting the Premier Video Cards for YouTube for 2024
- What’s in It for a Million YouTube Viewers, In 2024
- [Updated] In 2024, Data-Driven Decision Making in Your YouTube Shorts Strategy
- [Updated] Creating Compelling Channel Names Simplified for 2024
- [New] Dismantle Bots, Elevate YouTube Watch Time for 2024
- Turning Traffic Into Cash Calculating the Essential Youtube Number for 2024
- [Updated] 2024 Approved Expanding Digital Presence Stream to YouTube + Additional Platforms
- [New] The Pathway to Online Success Building a New YouTube Channel
- [New] Adobe Premiere Tips YouTube Video Uploads for 2024
- [New] 2024 Approved Explore the World in High Definition on YouTube
- [Updated] In 2024, Discover the Top 8 Cost-Free Videography Suites for Digital Filmmakers
- 2024 Approved Mastering Sound Integrating Music Into KineMaster
- [New] In-Depth How Vimeo Stacks Up Against YouTube
- [New] In 2024, Easy Recording Techniques for Live Gameplay
- [Updated] In 2024, Instagram Wisdom The Most Overlooked Features
- New Easy Way to Combine Several Xvid Files Into One Windows, Mac,Android
- In 2024, Navigating TikTok Your Essential Toolbox
- [Updated] Enhancing Your Video's Final Impression
- [New] 2024 Approved Ultimate Guide to Prime 3Ds Reproduction Software
- How to Change GPS Location on Honor 90 Lite Easily & Safely | Dr.fone
- Unlocking Advanced Android Screen Recording
- Title: "[Updated] 2024 Approved 10 Recording Tips to Record Audio in High Quality"
- Author: Kenneth
- Created at : 2024-06-05 10:28:05
- Updated at : 2024-06-06 10:28:05
- Link: https://facebook-video-footage.techidaily.com/updated-2024-approved-10-recording-tips-to-record-audio-in-high-quality/
- License: This work is licensed under CC BY-NC-SA 4.0.